Juniper Networks EX2200 manual Radiation and Laser Warnings, General Laser Safety Guidelines

Models: EX2200

1 176
Download 176 pages 21.77 Kb
Page 141
Image 141

CHAPTER 16

Radiation and Laser Warnings

Laser and LED Safety Guidelines and Warnings for EX Series Switches on page 121

Radiation from Open Port Apertures Warning for EX Series Switches on page 124

Laser and LED Safety Guidelines and Warnings for EX Series Switches

EX Series switches and the XRE200 External Routing Engine are equipped with laser transmitters, which are considered a Class 1 Laser Product by the U.S. Food and Drug Administration and are evaluated as a Class 1 Laser Product per EN 60825-1 requirements.

Observe the following guidelines and warnings:

General Laser Safety Guidelines on page 121

Class 1 Laser Product Warning on page 122

Class 1 LED Product Warning on page 122

Laser Beam Warning on page 123

General Laser Safety Guidelines

When working around ports that support optical transceivers, observe the following safety guidelines to prevent eye injury:

Do not look into unterminated ports or at fibers that connect to unknown sources.

Do not examine unterminated optical ports with optical instruments.

Avoid direct exposure to the beam.

WARNING: Unterminated optical connectors can emit invisible laser radiation. The lens in the human eye focuses all the laser power on the retina, so focusing the eye directly on a laser source—even a low-power laser—could permanently damage the eye.

Copyright © 2010, Juniper Networks, Inc.

121

Page 141
Image 141
Juniper Networks EX2200 manual Radiation and Laser Warnings, General Laser Safety Guidelines