Juniper Networks EX2200 manual Canada

Complete Hardware Guide for EX2200 Ethernet Switches

•EN 61000-3-3 Voltage Fluctuations and Flicker

•EN 61000-4-2 ESD

•EN 61000-4-3 Radiated Immunity

•EN 61000-4-4 EFT

•EN 61000-4-5 Surge

•EN 61000-4-6 Low Frequency Common Immunity

•EN 61000-4-11 Voltage Dips and Sags

Related • Compliance Statements for EMC Requirements for EX Series Switches on page 152

Documentation

• Compliance Statements for Acoustic Noise for EX Series Switches on page 154

Compliance Statements for EMC Requirements for EX Series Switches

This topic applies to hardware devices in the EX Series product family, which includes switches and the XRE200 External Routing Engine.

This topic describes the EMC requirements for these hardware devices for:

•Canada on page 152

•European Community on page 153

•Japan on page 153

•United States on page 153

•FCC Part 15 Statement on page 153

•Non-Regulatory Environmental Standards on page 154

Canada

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational, and safety requirements. Industry Canada does not guarantee the equipment will operate to the users’ satisfaction.

Before installing this equipment, users should ensure that it is permissible to connect the equipment to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the inside wiring associated with a single line individual service may be extended by means of a certified connector assembly. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.

152 Copyright © 2010, Juniper Networks, Inc.