Juniper Networks EX2200 manual Mounting the Switch to the Front Posts in a Rack

Complete Hardware Guide for EX2200 Ethernet Switches

Figure 19: Mounting the Switch to the Front Posts in a Rack

Switch

Side-rail Front

bracketbracket

g004477

7.Have a second person secure the front of the switch to the rack by using the appropriate screws for your rack.

8.Slide the rear brackets into the side-rail brackets. See Figure 20 on page 60.

Figure 20: Sliding the Rear Brackets to the Rear of a Four-Post Rack

Rear brackets

Switch

Side-rail bracket

g004478

9.Attach the rear brackets to the rear post by using the appropriate screws for your rack. Tighten the screws.

10.Ensure that the switch chassis is level by verifying that all the screws on the front of the rack are aligned with the screws at the back of the rack.

Related • Connecting Earth Ground to an EX Series Switch on page 67

Documentation

• Connecting AC Power to an EX2200 Switch on page 73

• Connecting and Configuring an EX Series Switch (CLI Procedure) on page 87

• Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 89

• Mounting an EX2200 Switch in a Recessed Position in a Rack or Cabinet on page 61

60 Copyright © 2010, Juniper Networks, Inc.