d. Do not refuel near open flames, pilot lights, or sparking electrical equipment such as power tools, welders, and grinders.

e. The muffler and air cleaner must be installed and in good condition at all times as they function as flame arresters if backfiring occurs.

f. Do not smoke near the generator.

15.Ensure that generator is properly grounded. (See “Grounding the generator” section in this

manual.)

16.Do not wear loose clothing, jewelry, or anything that may be caught in the starter or other rotating parts.

17.Unit must reach operating speed before electrical loads are connected. Disconnect loads before turning off engine.

18.To prevent surging that may possibly damage equipment, do not allow engine to run out of fuel when electrical loads are applied.

19.When powering solid state equipment, a Power Line Conditioner should be used to avoid possible damage to equipment.

20.Do not stick anything through ventilating slots, even when the generator is not operating. This can damage the generator or cause personal injury.

21.Before transporting the generator in a vehicle, drain all fuel to prevent leakage that may occur.

22.Use proper lifting techniques when transporting the generator from site to site. Improper lifting techniques may result in personal injury.

23.To avoid burns, do not touch engine muffler or other engine or generator surfaces which became hot during operation.

SPARK ARRESTER

YOUR PRODUCT MAY NOT BE EQUIPPED WITH A SPARK ARRESTING MUFFLER. If the product will be used around flammable materials, such as agricultural crops, forests, brush, grass, or other similar items, then an approved spark arrester should be installed and is legally required in the State of California. The California statutes requiring a spark arrester are Sections 13005(b), 4442 and 4443. Spark Arresters are also required on some U.S. Forest Service land and may also be legally required under other statutes and ordinances. An approved spark arrester is available from our product dealers, or may be ordered from Powermate Corporation, P.O. Box 6001, Kearney, Nebraska 68848.

1-800-445-1805.

DETERMINING TOTAL WATTAGE

In order to prevent overloading and possible damage to your generator it is necessary to know the total wattage of the connected load. To determine which tools and/or appliances your generator will run follow these steps:

1.Determine if you want to run one item or multiple items simultaneously.

2.Check wattage requirements for the items you will be running by referring to the load’s nameplate or by calculating it (multiply amps x volts = watts).

3.Total the watts for each item. If the nameplate only gives volts and amps, multiply volts x amps = watts.

1 KW = 1,000 watts.

4.Motorized appliances or tools require more than their rated wattage for start up.

NOTE: Allow 2 1/2 to 4 times the listed wattage for starting equipment powered by electric motors.

5.The generator’s rated watts should match or exceed the total number of watts required for the equipment you want to run.

6.Always connect the heaviest load to the generator first, then add other items one at a time.

English

 

4

 

Customer Hotline 1-800-445-1805

 

 

 

 

 

Page 3 Page 5
Page 4
Image 4
Powermate PM0103000 manual Spark Arrester, Determining Total Wattage, KW = 1,000 watts
Page 3 Page 5

PM0103000 specifications

The Powermate PM0103000 is a powerful and versatile generator designed to meet the needs of both residential and commercial users. It is particularly popular among construction sites, outdoor events, and emergency situations, providing reliable electricity when it is needed most. One of its standout features is its robust engine, which is engineered for efficiency and longevity. With a potent 10,000 watt peak output and a continuous output of 8,000 watts, the PM0103000 delivers ample power to run multiple appliances simultaneously, making it ideal for heavy-duty applications.

Equipped with a 420cc four-stroke engine, this generator ensures reliable performance and low fuel consumption. It runs on gasoline, providing convenience and ease of use for a variety of settings. The generator includes a large fuel tank that offers extended run time, allowing users to focus on their tasks without frequent refueling interruptions. Additionally, the Powermate PM0103000 features a low-oil shutdown system, which helps protect the engine from damage by automatically turning off the generator when oil levels are too low.

Durability is another key characteristic of the PM0103000. It boasts a rugged steel frame that not only protects the generator components but also enhances its stability during operation. The generator is fitted with pneumatic tires, allowing for easy maneuverability across different terrains. Users will also appreciate the built-in transport handle, which provides added convenience for mobility.

In terms of technology, the PM0103000 incorporates an advanced voltage regulator, offering stable power output to protect sensitive electronics from voltage fluctuations. The inclusion of multiple outlets enhances its functionality, providing several 120V AC outlets as well as a 12V DC outlet for battery charging.

Noise reduction is an essential feature for many users, and Powermate has taken this into account with the design of the PM0103000. The generator is engineered to operate at relatively low noise levels compared to other models in its class, making it suitable for use in residential areas or during outdoor gatherings where noise may be a concern.

In summary, the Powermate PM0103000 generator combines powerful performance with user-friendly features and rugged durability. Its efficient engine, ample power output, advanced voltage regulation, and low noise operation make it an excellent choice for anyone in need of reliable energy in various settings. Whether for emergency preparedness or daily use, the PM0103000 shines as a dependable power solution.
Top Page Image Contents