Diagram 17
+
5.Reinsert two fresh batteries. Remove the existing batteries from the unit and reinsert two fresh
Note: All the LCD segments momentarily appear when the fresh batteries are installed.
6.Replace the back of the electronic console by inserting the four Phillips head screws back into place. Tighten the screws using the Phillips head screwdriver.
7.Reconnect the reed switch wire into the console. For the 903 treadmill, be sure to route the wire through the hole on the handrail clamp before reconnecting the wire.
8.Slide the console back onto the mounting bracket.
9.Reset the display by pressing all three buttons (SELECT, CLEAR, and SET) at the same time.
10.Press the SELECT button if you wish to turn the electronic console ON.
page 22
