Precor 903 owner manual Installing the Electronic Console, Assembly Procedures

Installing the Electronic Console

The handrail clamp can be used on either the 903 or 904 treadmill. However, the steps used to install the console onto the clamp are slightly different depending on which treadmill you have. Please refer to the steps that apply to your treadmill.

903 Assembly Procedures

To install the 903 electronic console, take the following steps:

1.Locate the handrail clamp in the box that accompanies the electronic console’s box. Remove the long and short screwsfromthehandrailclampusingyourfingersora Phillips head screwdriver. Set the screws aside. You can discard the short screws since they are only used for the 904 assembly.

Diagram 1

2.Place the handrail clamp around the mid-portion of the handrail as shown in Diagram 1. Place a hand on either side of the handrail clamp to gently pull it apart so that you can slide it onto the handrail’s foam grip.

Important: Do not mount the clamp on the painted surface of the handrails.

page 5