![](/images/new-backgrounds/1254750/2547507x1.webp)
Before You Begin
Thank you for purchasing the
Obtain the appropriate tools before assembling the electronic console onto the 903 or 904 treadmill. You will need a Phillips head screwdriver to attach the electronic console onto the handrail clamp.
Unpacking the Electronic Console
Carefully unpack the electronic console and its compo- nents. Make sure that you have the following items:
❑one electronic console
❑one mounting bracket with four (two short and two long) Phillips head screws
❑one reed switch and wire
❑one magnet
❑three C
❑two mounting pads (one thick and one thin pad)
If any items are missing, contact the dealer from whom you purchased the treadmill or call
page 4