Precor P80 manual To level the AMT

Assembling the AMT 23

To level the AMT:

1.Gently rock the AMT while standing on one of its foot plates and grabbing the opposite handlebar. First stand on the left foot plate and grab the right handlebar to rock the AMT, then repeat the step while standing on the right foot plate and holding the left handlebar. If there is any movement, ask your assistant to tip the unit on its side while you locate the adjustable feet.

2.Reposition the adjustable feet as needed.

If you want to …	Then turn the adjustable feet …
Raise the front end of the AMT	Counterclockwise
Lower the front end of the AMT	Clockwise

Figure 7: Location of adjustable feet

3.When you are finished positioning the adjustable feet, place the unit on the floor. Try rocking it again, as described in step 1, to verify that it is level.

4.To install the rear pedestal, align it over the rear crosspiece and press it gently into place.

Figure 8: Rear pedestal placement