![](/images/new-backgrounds/1134520/134520157x1.webp)
Assembling the Exercise Bike | 25 |
7.Lift the upright support and position its lower end over the upright support channel on the body assembly. Slide the support into position so that its screw holes line up with the corresponding holes on the body assembly, as shown in the following figure.
Note: If the support is positioned correctly, it rests on a metal tab in the upright support channel.
Figure 7: Upright support installation
Important: In the following step, be extremely careful not to trap or pinch any of the cables between the mounting screws and their seats.