Precor RBK 615 . UBK 615 owner manual Installing the Console, To connect the console

Models: RBK 615 . UBK 615

1 104
Download 104 pages 61.45 Kb
Page 86
Image 86

32

Assembling and Maintaining the UBK 615 Upright Exercise Bike

Installing the Console

Before you begin, make sure that the cables have been fed through the mounting bracket and their ends extend through the round opening at the base of the bracket. The television cable, along with any audio, video, or power cables needed to support a Cardio Theater screen or receiver, should be fed through the bracket and should extend through the opening at its upper end.

To connect the console:

1.Using a #2 Phillips screwdriver, remove the four 1-inch panhead machine screws securing the back cover of the console. Lift off the back cover and set it aside, along with the four machine screws.

2.Lower the console over the mounting bracket so that the two plastic hooks at the top of the console fit over the two tabs at the upper corners of the bracket.

Figure 13: Seating the console

Page 86
Image 86
Precor RBK 615 . UBK 615 owner manual Installing the Console, To connect the console