Mount interlocking
Step 5
Warning: The plasma display is heavy and 2 people are needed to lift and install it. Failure to do so could result in serious personal injury.
Before placing the plasma on the wall recheck all hardware for proper tightness and security. Align the PSM series mount tab openings to the receiving tabs on the universal flat mount or tilt mount. Slide the plasma down, right and down again to lock the mounts together. Make sure all tab openings are interlocked with the receiving tabs before letting go of the plasma. See fig 5.
EXAMPLE PLASMA FOR ILLUSTRATION PURPOSES ONLY
Plasma display
| Securing tabs | |
| Universal flat | |
| mount | |
| Align the tabs and | |
push the plasma | ||
as shown on | ||
mount | ||
arrows to lock in | ||
| ||
| place | |
| Tab openings |
Plasma display
Wall structure | Wall structure |
10
Thank you for choosing PREMIER MOUNTS INC. for your installation needs.
If you have any questions please contact PREMIER MOUNTS INC.
Information is shown on the front of this page.
