(Optional) ceiling adapters
AST-2446: 1½" (Adjustable height suspension adapter) - Offering height adjustment in 1¼" increments, between 24" and 46" (12" - 24", if you cut down), this suspension adapter mates with the single display swivel adapter and 1½" (NTP) pipe.
AST-2446/2: 2" (Heavy-duty adjustable height suspension adapter) - Offering height adjustment in 1¼" increments, between 24" and 46" (12" - 24", if you cut down), this suspension adapter mates with the dual display swivel adapter and 2" (NTP) pipe.
PSD-S: 1½" (Single display swivel adapter) – This adapter could be mated with any two of out ultra slim flat or tilt plasma mounts to allow 360° swivel for a ceiling installation. It works with 1½" threaded (NTP) pipe or AST-2446.
PSD-D: 2" (Dual display swivel adapter) - This adapter could be mated with any two of out ultra slim flat or tilt plasma mounts to allow 360° swivel for a ceiling installation of two back to back displays. It works with 2" threaded (NTP) pipe or AST-2446/2.
PSD-PVW1: 1½" (Single display pole adapter) – Attach this adapter directly to any of the flat or tilt plasma mounts, and slide it over a 2" scheduled 40 steel pipe, then secure at any height with two (2) tension-locked bolts.
PSD-PVW2: 2" (Dual display pole adapter) – Attach any two (2) of the flat or tilt plasma mounts back to back with this adapter, and slide it over a 2" scheduled 40 steel pipe, then secure at any height with two (2) tension-locked bolts.
A | Plasma display |
| |
B | PSM-Mount |
| |
C | PSM-Hardware |
| (See chart on pg 5) |
D | M10 x 12 (mm) Hex |
| screws, flat washers |
| (4,4,8 Pack) |
E | PSB-UWFB Universal flat |
| mount |
F | M6 Security screws used |
| on tilt, ceiling, cart, floor |
| stand applications. |
G | PSB-TBP Universal tilt |
| mount |
H | AST-2446 adjustable |
| suspension post for single |
| display mounting or |
| AST-2446/2 adjustable |
| suspension post for dual |
| display mounting. |
I | PSD-S Single mounting |
| adapter |
J | PSD-D Dual mounting |
| adapter |
K | 1½" (NTP) For single |
| ceiling display installations |
| or 2" (NTP) For dual |
| ceiling installations |
| |
| |
| |
EXAMPLE PLASMA FOR ILLUSTRATION PURPOSES ONLY
Ceiling installation
assembly
Horizontal to vertical mounting
Note: The M6 x 12 (mm) Security screws must always be used for extra security.
