Prestigio P400MW, P460MW External Control Device Setup, How to connect external control equipment

TIME

When viewing a TV programme, press this button to dis-play the time at the top right hand corner of the screen.Press this button again to remove the display. In the tele-text mode, press this button to select a sub page number.The sub page number is displayed at the bottom of thescreen. To hold or change the sub page,press the RED /GREEN,/\ / \/ or NUMBER buttons.

Press this button again to exit this function.

ENG

External Control Device Setup

-Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the set’s functions externally.

How to connect external control equipment

Connect the serial port of the control device to the RS-232C jack on the set.

RS-232C connection cables are not supplied with the Monitor.

The Monitor remote control and front panel controls (except main power) will not be functional if the set is con-trolled by a PC computer or other external device.

Type of connector; D-Sub 9-pin male

Communication Parameters

•Baud rate : 4800bps (UART)

•Data length : 8bits

•Parity : None

•Stop bit : 1bit

•Communication code : HEX code

PRESTIGIO P400MW / P460MW 35