Pride Mobility Quantum 1122 3SP, Quantum 1122 4MP manual Foot Platform Height Adjustment

	V . C O M F O R T A D J U S T M E N T S
Foot Platform Height Adjustment
The foot platform height can be easily adjusted to one of		FOOT PLATFORM BRACKET
six different heights.
		NUTS AND BOLTS
To raise or lower the foot platform:
1.	Remove the nuts and bolts from the foot platform
	bracket. See figure 18.
2.	Raise or lower the foot platform to the desired height.
3.	Reinstall the nuts and bolts to the foot platform bracket
	and tighten.
Foot Platform Depth Adjustment		BALL DETENT PIN
To adjust the foot platform depth:

1.Remove the nuts and bolts from the foot platform bracket. See figure 18.

2.Move the foot platform in or out to the desired depth.

3.Reinstall the nuts and bolts to the foot platform bracket and tighten.

Foot Platform Angle Adjustment

You can adjust the angle of the foot platform with a hex key. See figure 19.

To adjust the foot platform angle:

1.Locate the setscrew on the underside of the foot plat- form.

2.Turn the setscrew to raise or lower the front of the foot platform.

Figure 18. Foot Platform Height Adjustment

SETSCREW

Swing-away Footrests (Optional)

Swing-away footrests (SFRs) are an option. They enable you to swing the footrest to the side before transferring from your power chair.

To swing the footrests:

1.Push in the SFR release lever. See figure 20.

2.Swing the footrest off to the side.

To adjust the SFR length:

1.Remove the two screws from the side of each leg rest extension.

2.Slide the leg rest in or out to the desired length.

3.Reinstall the two screws on each leg rest extension.

Figure 19. Foot Platform Angle Adjustment

SFR RELEASE LEVER

FOOTREST

EXTENSION

ADJUSTMENT

SCREWS

Figure 20. Swing-Away Footrests

Quantum 1122 Series www.quantumrehab.com 27