V . C O M F O R T A D J U S T M E N T S | |
Power Elevating Seat Operation |
|
You can control the power elevating seat through either the |
|
toggle switch located on the armrest (see figure 24) or |
|
through the controller. For information on how to raise and |
|
lower the power elevating seat through your controller, con- |
|
tact your Quantum Rehab Specialist. |
|
To operate the power elevating seat through toggle |
|
switch: |
|
1. Push the toggle switch forward to raise the seat. When |
|
you release the toggle switch, the seat will stop. Once |
|
the seat reaches its highest extension, the lift action will |
|
stop, but you should continue to hear and/or feel the lift |
|
motor running. This is because there is a clutch mecha- |
|
nism that allows the motor to continue running after the |
|
lift has reached its limit. This clutch works at both the |
|
top and bottom extensions of the lift. |
|
NOTE: Do not allow the motor to run more than a | Figure 24. Power Elevating Seat Switch |
few seconds after the mechanism reaches the top or |
|
bottom limit. |
|
2.Pull the toggle switch backward to return the seat to its lowest position. When returning to the lowest po- sition, always be sure that the mechanism has reached its lowest limit.
To use the swivel feature:
1.Locate the friction lock lever under the seat.
2.Pull back on the friction lock lever and rotate the seat 90° to whichever side the controller is located.
3.Push the friction lock lever forward to lock the seat in place.
WARNING! Do not attempt to drive the power chair with the seat facing to the side. Always return the seat to the forward facing position before operating the power chair.
30 | www.quantumrehab.com | Quantum 1122 Series |
