V . C O M F O R T A D J U S T M E N T S
Armrest Height Adjustment
To change the armrest height:
1. Loosen the setscrews on the armrest. See figure 19.
2. Raise or lower the armrest to the desired height.
3. Tighten the setscrews to secure the armrest.
Controller Position | SETSCREW |
You can move the controller in toward or out away from the armrest, or change the position of the control- ler for either
WARNING! Do not place the controller harness so that it can be pinched in the seat frame or the power base
| frame. |
|
To extend the controller: |
| |
1. | Flip up the armrest so it is perpendicular to the floor. |
|
2. | Loosen the setscrew on the controller bracket. See |
|
| figure 20. |
|
3. | Slide the controller into or out of the armrest to the | Figure 20. Underside of Armrest |
| desired position. |
|
4. | Tighten the setscrew to secure the controller. |
|
To change the controller position:
1.Turn off the power to the controller.
2.Unplug the controller harness from the power base.
3.Cut the wire tie(s) that secure the controller harness to the armrest and seat.
4.Flip up the armrests.
5.Loosen the setscrew on the underside of each armrest. See figure 20.
6.Slide the controller out of the armrest.
7.Place the controller into the other armrest.
8.Tighten the setscrew to secure the controller.
9.Route the controller harness along the seat frame and secure with wire ties. See figure 13 or 16.
10.Plug the controller into the power base. See figure 6, 7, or 8.
Jazzy Select Series | www.pridemobility.com | 29 |
