Pride Mobility INFMANU3676 Controller Connector, OFF-BOARD CHARGER/PROGRAMMING Socket, Lock Mode

16 Basic Operation Instructions

Right/Left Turn Indicator Keys (For Optional Equipment)

The right/left turn indicator keys toggle either the left or right turn indicators. Press once to turn on and press again to turn off. You can also turn off the selected turn indicator by pressing the opposite indicator key or the hazard key.

Light Key (For Optional Equipment)

The light key turns the headlights/taillights on and off independent of other indicators.

Hazard Key (For Optional Equipment)

The hazard key activates both turn indicators at the same time. You can only cancel this by pressing the hazard key again.

CONTROLLER CONNECTOR

This connects the Dynamic controller to the power module located on the power base.

OFF-BOARD CHARGER/PROGRAMMING SOCKET

You may use an off-board charger to charge the power chair batteries through the 3-pin socket located on the front of the Dynamic controller. If you use an off- board charger, the charger current should not exceed 8 amps. Contact your au- thorized Pride Provider for more information.

WARNING! Only chargers with Neutrik NC3MX plugs should be connected to the off-board charger/programming socket. See your authorized Pride Provider for more information.

NOTE: The socket may also be used for reprogramming the Dynamic con- troller. Contact your authorized Pride Provider for more information.

LOCK MODE

The Dynamic controller is equipped with a feature that enables you to “lockout” unauthorized users.

To lock the Dynamic controller:

1.While the power is on, press and hold the on/off key for 4 seconds. The display will turn off immediately.After 4 seconds, all LEDs will flash briefly and the horn will sound a short beep.

2.The Dynamic controller is now locked.

Dynamic Controller www.pridemobility.com