Pride Mobility INFMANU4440 C O M F O R T, Seat Rotation Adjustment, FRONT-TO-BACK Seat Adjustment

A D J U S T M E N T S

SEAT ROTATION LEVER

BOLTS

SEAT SLIDING LEVER

Figure 16A. Seat Adjustment Levers

V I . C O M F O R T

To adjust your scooter’s reclining seat, perform these steps. See figure 16.

1. With your back pressed up against the seatback, lift up on the seatback adjustment lever and lean forward or backward to adjust the seatback angle.

2. Release the seatback adjustment lever once the seat is in a comfortable riding position.

SEAT ROTATION ADJUSTMENT

The seat rotation lever will secure the seat into several positions.

1. Push forward on the seat rotation lever to disengage the seat. See figure 16A.

2. Rotate the seat to the desired position.

3. Release the lever to secure the seat into place.

FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the seat forward or backward to
adjust the distance between the seat and the tiller.
See figure 16A.
1.	Move the seat sliding lever outward.
2.	While holding the lever out, slide the seat for-
	ward or backward.	SEAT HEIGHT	UPPER SEAT
3.	Release the seat sliding lever once the seat is in	ADJUSTMENT
			POST
	the desired position.	NUT
			LOCATING
SEAT HEIGHT ADJUSTMENT			HOLE
The seat can be repositioned to different heights.			SEAT HEIGHT
See figure 17.
			ADJUSTMENT
1.	Remove the seat and shroud from your scooter.
			BOLT
	See VII. “Disassembly and Assembly.”
		CLAMP-ACTION
2.	Loosen the seat height adjustment nut and
		NUT
	remove it from the bolt. Remove the bolt and
			CLAMP-ACTION
	washers.
			BOLT
3.	Loosen the clamp-action bolt.
4.	Raise or lower the upper seat post to the desired		LOWER SEAT POST
	seat height.	Figure 17. Seat Height Adjustment
5.	While holding the upper seat post at that height,

match up the locating holes in the upper seat post with those of the lower seat post.

6.With one washer on the seat height adjustment bolt, insert it through the locating holes of both the upper and lower seat posts.

7.Reinstall the other washer and nut and tighten.

NOTE: Ensure both washers have been reinstalled before fully tightening the seat height adjustment nut.

8.Tighten the clamp-action bolt.

9.Reinstall the rear shroud and the seat.

32 www.pridemobility.com Celebrity X LE