Pride Mobility INFMANU4440 manual Mirror Position, Positioning Belt Optional

V I . C O M F O R T A D J U S T M E N T S

MIRROR POSITION

To install the mirror (see figure 18):

1.Determine a side to install the mirror and remove the rubber plug from the top of the tiller handle.

2.Insert the threaded end of the mirror holder into the opening and rotate it clockwise until snug.

3.If necessary, rotate the nut clockwise to secure the mirror in place.

To adjust the mirror:

1.Position yourself in a seated driving position facing forward.

2.Adjust the mirror left, right, up or down until you have a good line of sight behind you.

MIRROR HOLDER

PLUG

NUT

Figure 18. Mirror Installation

POSITIONING BELT (OPTIONAL)

Your scooter seat may be equipped with an auto-type positioning belt that can be adjusted for operator comfort. See figure 19. The positioning belt is designed to help support the operator so that he/she does not slide down or forward in the seat. The positioning belt is not designed for use as a restraining device.

WARNING! The positioning belt should be secured at all times. Never allow the positioning belt to hang or drag on the floor as it may become entangled.

To install the positioning belt (if required):

1.Remove the seat from your scooter.

2.Place the seat upside down so that you can see the bottom of the seat base.

3.Remove the two bolts on the outermost part of the rear seat mounting strap. See figure 16A.

4.Insert the bolt through the appropriate end of the positioning belt and then through the seat mounting strap for each side of the scooter seat.

5.Tighten the bolts.

To adjust the positioning belt for operator comfort:

1.Insert the metal tab on the right side of the belt into the plastic housing on the opposite strap until you hear a “click.”

2.Pull the strap on the right side of the belt until it is secure, but not so tight as to cause discomfort.

To release the positioning belt:

1. Press the push button mechanism on the plastic housing.

MANDATORY! Make sure the positioning belt is properly secured to the scooter and is adjusted for operator comfort.

MANDATORY! Inspect the positioning belt for loose parts or damage, including tears, worn spots, bent hardware, or damaged latch mechanisms, dirt or debris, before each use of the scooter. If you discover a problem, contact your authorized Provider for maintenance and repair.

Figure 19. Positioning Belt

Celebrity X LE www.pridemobility.com 33