V I . C O M F O R T A D J U S T M E N T S
To adjust the seatback angle:
1.Pull down on the lever.
2.Move the seatback down or up to the desired position.
3.Release the lever.
Seatback Angle Adjustment
If your Jazzy is equipped with an adjustable seatback, you can adjust it to four (4) different angles: 90°, 102°, 105°, or 107°.
To adjust the seatback angle:
1.Remove the adjusting screws on both seat hinges. See figure 11.
2.Set the seatback at desired angle.
3. Reinstall the screws on both seat hinges and tighten.
Armrest WidthAdjustment
You can change each armrest’s width independently of each other.
NOTE: Changing the armrest width may increase the overall | Figure 10. Seat Mounting Holes | ||
width of your Jazzy. | |||
| |||
Tochangethearmrestwidth: |
| ||
1. | Locate the two armrest knobs on each side of the armrest receiver |
| |
| bracket. See figure 11. | JAM NUT | |
2. | Loosen the knobs. | ||
JAM NUT | |||
3. | Slide the armrests in or out to the desired width. | ||
4. | Tighten the knobs. |
| |
ArmrestAngleAdjustment
To change the armrest angle:
1.Lift the armrest straight up so that it is perpendicular to the floor.
2.Loosen the jam nuts. See figure 11.
3. | Loosen the adjusting screw. | ADJUSTING | |||
4. | Turn the adjusting screw clockwise to raise the front of the armrest, | SCREW |
|
|
|
| or turn the adjusting screw counterclockwise to lower the front of |
|
|
|
|
|
|
|
|
| |
| the armrest. See figure 11. |
|
|
|
|
|
|
|
|
| |
5. | Tighten the jam nuts to lock the adjusting screw into place. | ARMREST KNOB |
|
| |
|
|
|
| ||
Footrest Height
The footrest height is easily adjusted to one of six different heights in 1- in. increments.
To raise or lower the footrest: |
| |
1. | Remove the nuts and bolts from bracket. See figure 12. |
|
2. | Raise or lower the footrest to the desired height. |
|
3. | Reinstall the bolts and nuts into the footrest bracket and tighten. | Figure 11. Seatback and Armrest |
|
| Adjustments |
22 | www.pridemobility.com | Jazzy 1101/1121/Rev E/Jun03 |
