Pride Mobility Jazzy Select 7 manual Heavy Duty Drop-in Leg Rests Optional, Multi-Axis Foot Plates

	V I . C O M F O R T A D J U S T M E N T S
Heavy Duty Drop-in Leg Rests (Optional)
You can adjust the forward/back position, as well as the
length of the heavy duty drop-in leg rests. See figure 30.		LEG REST
		HANGER
To adjust the forward/back position:		ADJUSTMENT BOLT
1.	Remove the adjustment bolt from each side rail.
2.	Move the leg rest hanger in or out to the desired position.
3.	Align the adjustment holes in the leg rest hanger with	LEG REST
	those in the side rail.	EXTENSION
4.	Reinstall each adjustment bolt to secure the leg rest	ADJUSTMENT SCREWS
	hangers.
To adjust the leg rest length:
1.	Remove the adjustment screws from the leg rest
	extension.
2.	Slide the leg rest up or down to the desired length.
3.	Align the adjustment holes in the leg rest extension	Figure 30. Heavy Duty Drop-In Leg Rests
	and reinstall the adjustment screws.

Multi-Axis Foot Plates
The multi-axis foot plate assembly can be installed on either
a swing-away footrest or an elevating leg rest. The multi-
axis foot plate has four adjustments: leg rest length (A),	A
position (B), tilt (C), and angle (D). See figure 31.	B
To change leg rest length (A):	C
	D

1. Remove the hardware.

2.Move the leg rest to the desired position.

3.Reinstall the hardware.

		A
To change foot plate position (B):
1.	Remove the hardware.
2.	Move the foot plate to the desired position.	B
3.	Reinstall the hardware.
To change foot plate tilt (C):
1.	Loosen the hardware.	C
2.	Tilt the foot plate to the desired position.
3.	Tighten the hardware.
To change foot plate angle (D):		D
1.	Turn the setscrew clockwise to decrease the angle.	SETSCREW
2.	Turn the setscrew counterclockwise to increase the
		LOCATION
	angle.
		Figure 31. Multi-Axis Foot Plate

32 www.pridemobility.com Jazzy Select 7