Pride Mobility Jazzy Select 7 C O M F O R T, Foot Platform Angle Adjustment, Swing-Away Footrests

V I . C O M F O R T

2.Raise or lower the foot platform to the desired height.

3.Reinstall the quick release fastener into the foot platform bracket and tighten.

Foot Platform Angle Adjustment

You can adjust the angle of the foot platform with a hex key and wrench.

To adjust the foot platform angle:

1.Flipupthefootplatformandlocatethesetscrew.Seefigure27.

2.Turn the setscrew to raise or lower the front of the foot platform.

Swing-Away Footrests

Swing-Away Footrests (SFRs) enable you to rotate the foot- rests to the side before you transfer onto or off of your power chair. See figure 28.

To rotate the SFRs:

1.Push in the release lever.

2.Rotate the SFRs.

To adjust the SFR length:

1.Remove the two adjustment screws from the back of each footrest extension.

2.Slide the footrest up or down to the desired length.

3.Reinstall the two adjustment screws.

Elevating Leg Rests

Elevating Leg Rests (ELRs) offer an infinite range of adjust- ment for the leg angle and a footrest adjustment range of 12– 19 in. (30.48-48.26 cm). See figure 29.

To rotate the ELRs:

1.Push in release lever A.

2.Rotate the ELRs.

To adjust the ELR angle:

1.Push down release lever B.

2.Move the leg rest to the desired angle.

To adjust the ELR length:

1.Remove the two adjustment screws from the back of each leg rest extension.

2.Slide the leg rest up or down to the desired length.

3.Reinstall the two adjustment screws.

A D J U S T M E N T S

SFR RELEASE LEVER

FOOTREST

EXTENSION

ADJUSTMENT

SCREWS

Figure 28. Swing-away Footrest Adjustment

	RELEASE LEVER A
RELEASE LEVER B
LEG REST	ADJUSTMENT
EXTENSION
	SCREWS

Figure 29. Elevating Leg Rests

Jazzy Select 7 www.pridemobility.com 31