Pride Mobility Outlander DE, Outlander LP, Outlander XL manual Battery Replacement

V . B A T T E R Y C H A R G I N G

BATTERY REPLACEMENT

WARNING! Battery posts, terminals, and related accessories contain lead and lead compounds. Wear goggles and gloves and wash hands after handling.

MANDATORY! Use only AGM or Gel-Cell batteries to reduce the risk of leakage or explosive conditions.

WARNING! Corrosive chemicals contained in battery.

WARNING! Keep tools and other metal objects away from battery terminals. Contact with tools can cause electrical shock.

WARNING! Connect the battery harnesses in the proper manner. RED (+) cables must be connected to positive (+) battery terminals/posts. BLACK (-) cables must be connected to negative (-) battery terminals/posts. REPLACE cables immediately if damaged. Protective caps must be installed over all battery terminals.

NOTE: If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag and contact your local waste disposal agency or your authorized Pride Provider for instructions on disposal and battery recycling, which is our recommended course of action.

Follow these steps to replace the onboard battery (see figure 21):

1.Unfasten the battery securement strap located at the bottom of the battery box.

2.Remove the hardware from the battery securement bracket and remove the bracket.

3.Remove the hardware from the battery connector.

4.Slide the battery out of the battery box to expose the battery harness.

5.Disconnect the battery harnesses from the bat- tery terminals.

6.Connect the battery harnesses to the new battery.

7.Slide the new battery into the battery box.

8.Reinstall the hardware to secure the battery connector and tighten.

9.Reinstall the battery securement bracket and tighten the hardware.

10.Refasten the battery securement strap.

BATTERY BOX

BATTERY SECUREMENT STRAP

BATTERY SECUREMENT BRACKET

BATTERY CONNECTOR

Figure 21. Battery Replacement

Outlander Series www.pridemobility.com 19