V I I I . C O M F O R T A D J U S T M E N T S
TILLER ANGLE ADJUSTMENT
WARNING! Remove the key from the key switch before adjusting the tiller or the seat. Never attempt to adjust the tiller or the seat while the scooter is in motion.
Your scooter is equipped with a pivoting tiller that allows adjustment to several positions from the scooter deck to the farthest forward stop. See figure 10.
1.Turn the tiller angle adjustment knob counterclockwise to loosen the tiller.
2.Move the tiller to a comfortable position.
3.Turn the tiller angle adjustment knob clockwise to secure the tiller in position.
NOTE: In order to lower the tiller to the scooter floorboard, you must first remove the seat and both battery packs. See IX. “Disassembly and Assembly.”
SEAT ROTATION
The seat rotation lever locks the seat in one of four positions.
1.Pull up on the seat rotation lever to unlock the seat. See figure 11.
2.Rotate the seat to the desired position.
3.Release the seat rotation lever to lock the seat se- curely in place.
ARMREST WIDTH ADJUSTMENT
The armrest width can be adjusted inward or outward.
1.Loosen the armrest adjustment knobs at the back of the seat frame. See figure 11.
2.Slide the armrests in or out to the desired width.
3.Tighten the armrest adjustment knobs as required.
The armrests can also pivot upward to aid in getting onto and off of your scooter.
TILLER ANGLE |
ADJUSTMENT |
KNOB |
Figure 10. Tiller Angle Adjustment Knob
ARMREST ADJUSTMENT KNOBS |
BOLTS |
SEAT ROTATION LEVER |
Figure 11. Seat Adjustments
30 | www.pridemobility.com | Revo |
