I X . D I S A S S E M B L Y A N D A S S E M B L Y
DISASSEMBLY
You can disassemble the scooter into seven pieces: the seat, the front section, the rear section, the rear shroud, the basket, and the batteries. See figure 13. No tools are required to disassemble or assemble your scooter, but keep in mind that the disassembled sections of the scooter take up more floor space than the assembled unit. Always disassemble or assemble your scooter on a level, dry surface with sufficient room for you to work and move around your
WARNING! Lifting weight beyond your physical capability may result in personal injur y. Ask for assistance when necessar y while disassembling or assembling your scooter.
To disassemble:
1.Remove the key and ensure that the manual free- wheel lever is in the drive position.
2.Lock the tiller in place by positioning it forward then pushing the tiller lock knob inward and turn- ing it clockwise 90 degrees. See figure 14.
3.Remove the seat by pulling up on the seat rotation lever, rotating the seat
4.Disengage the left battery pack lock by pulling it outward from the scooter. See figure 15.
5.Remove the left battery pack by lifting it straight up and away from the scooter. See figure 15.
6.Remove the right battery pack in the same manner as in the above step.
7.Unplug the
REAR | FRONT |
SECTION | SECTION |
| SEAT |
BATTERY PACKS | |
Figure 13. Scooter Components
SHOWN IN
UNLOCKED
POSITION
Figure 14. Tiller Lock Knob
LEFT BATTERY PACK
# |
|
LEFT BATTERY PACK LOCK |
|
Figure 15. Battery Pack Removal/Installation | Figure 16. |
NOTE: When DISASSEMBLING the scooter, always remove the LEFT battery pack first. When ASSEMBLING the scooter, always reinstall the RIGHT battery pack first.
32 | www.pridemobility.com | Revo |
