V I I I . C O M F O R T A D J U S T M E N T S
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the scooter’s seat forward or rearward to one of three settings, to adjust the distance between the seat and the tiller.
1.Remove the seat from your scooter. Refer to IX. “Disassembly and Assembly.”
2.Remove the four bolts that fasten the seat to the seat platform. See figure 11.
3.Align the seat platform with the desired set of holes on the seat.
4.Replace and tighten the four bolts securely.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to one of three different heights. See figure 12.
1.Remove the seat from your scooter. See IX. “Disas- sembly andAssembly.”
2.Use the attached ring to pull and remove the detent pin from the lower seat post.
3.Raise or lower the upper seat post to the desired seat height.
4.While holding the upper seat post at that height, match up the adjustment holes in the upper and lower seat posts.
5.Fully insert the detent pin.
6.Replace the seat.
ADJUSTMENT HOLES
DETENT
PIN
Figure 12. Seat Height Adjustment
Revo | www.pridemobility.com | 31 |
