Primate Systems PDP TV manual Select input source signal, Selecting a Menu language

Basic Operations (continued)

Select input source signal

Using the SOURCE button

1

2

3

Press ENTER to confirm and the unit display signal from
the selected input channel.		source
			A	D	C1	C2	AV	TV
A --------	VGA, select signal from VGA (15-pin D-sub) terminals.				VGA
D--------	DVI, select signal from DVI terminals.
C1 ------	YPbPr1/YCbCr1, select signal from YPbPr1/YCbCr1 terminals.
C2 ------	YPbPr2/YCbCr2, select signal from YPbPr2/YCbCr2 terminals.
AV ------	VIDEO (SVIDEO), select signal from S-Video or Video terminal.
	The S-Video is prior to Video terminal when they are connected at the same time.
TV ------	Select TV signal.

Note:

This unit identifies the type of component video terminals automatically. If you connect Y, Cb, Cr terminals, the screen displays YCbCr detected on the bottom-right corner. Similary, if the component

Using source select menu

1

2

3

4

5

6

Press ENTER to confirm and the unit displays signal from the selected input channel.

settings
menu background			opaque
language			English
close caption mode			cc1
close caption	off	on	on mute
close capt. background			opaque
source select
right/left to source select

Selecting a MENU language

1

2

3

4 Press VOL+/- to select the appropriate language:

5

settings

menu background		opaque
language		English
close caption mode
		cc1
close caption	off	on on mute
close capt. background		opaque
source select

right/left to change language

22