TOC

INDEX

C. 6-PIN MINICIRCULAR AUXILIARY INTERFACE

The 6-pin minicircular auxiliary interface is used for connecting the printer with auxiliary equipment such as a CD transporter/ auto-loader.

Pin assignments are as follows:

6

5

4

3

2

1

Uses 5v logic @ 5mA

Pin Number Signal Description

1Busy - Output is high when the printer is busy or moving the CD Tray.

2Tray Out - Output is high when the CD Tray is fully ejected.

3Tray In - Output is high when the CD Tray is fully inserted.

4CD In - Output is high when the CD Tray is in and a CD is present.

5Ground.

6Tray In/Out - A low input moves the CD Tray in if it is out, and out if it is in.

TABLE A-2: Auxiliary Interface Pin Assignments

NOTE: Pins 1-4 are low if the printer is plugged in but the power has been turned off using the printer’s Power Button

Interfacing Information 47

Page 57
Image 57
Primera Technology 000424-510171-(05) manual PIN Minicircular Auxiliary Interface, Pin Number Signal Description