TOC | INDEX |
The Pause Button immediately pauses the motion of the Robotic Arm. It is also used in combination with the Pick Button to perform a reset on the robotics.
The Sequence Button moves the Robotic Arm from one position to the next. It is used mainly during the
The Pick Button is used to manually pick up a disc and to drop it in a Bin, the CD Recorder or the Reject area. It is also used in combination with Pause to perform a reset in the robotics.
The Input/Output Bins are situated on pegs around the base of the Autoloader. This is where you stack up to 100 blank discs, which are to be recorded and printed. The far left bin is left empty and will be the first output bin. The Autoloader will then keep track of which bins contain blank media and which bins will accumulate finished output.
The Reject Area is where discs are dropped if they do not pass a software verification test. Discs simply drop in the left bin of the Disc Publisher.
Rear Panel
This illustration shows the input ports found on the rear panel of the Autoloader:
Power Input Port | USB Port |
The Power port connects to a 12v 5 amp power converter.
The USB port connects to a standard 6' USB cable. Plug the other end directly into a USB port on the back of your computer.
4 Getting Started
