Primera Technology ADL-MAX user manual System Requirements, Overview of Operation

TOC INDEX

D.SYSTEM REQUIREMENTS

Please refer to the PC system requirements for Duplicator that will be used with the unit.

NOTE: The ADL-MAX is not Macintosh compatible.

E.OVERVIEW OF OPERATION

The following is a description of the complete process of copying and printing a CD job on your Autoloader:

1.Up to 300 blank discs may be loaded at one time. Each Input/Output Bin will hold 100 discs. The far left Input/Output Bin is left empty to be the first to collect finished output.

2.The Autoloader has an integrated robotic arm that "picks" one disc one at a time from an Input Bin.

3.CD Recorder Trays open automatically and the Robotic Arm places a disc into each of the recorders.

4.All CD Recorder Trays then automatically shut.

Through software control, you can perform a verification test on each CD-R disc before recording. If a disc does not pass (meaning that all or part of that disc is not recordable), the Robotic Arm picks it out of the CD Tray and sends it to the Reject Area, in the left bin of the Disc Publisher.

5.The CD-Rs are now recorded. If you were to fill up each CD with data, audio, video or music (650 MB), recording time is about 3 ½ to 4 minutes each. DVDs recording time is from 7-15 minutes depending on the speed of your media. Most jobs don't fill the entire disc, so recording time is usually less than this.

6.After recording, the Trays open automatically. The Robotic Arm will transport the first disc to the printer. All others will be transported to the Disc Publisher Output Bin temporarily.

7.The Robotic Arm will now load the drives with blank CD-Rs from an Input Bin to start recording the next round.

Getting Started 5