8.Once the label stock is fed into the printer, the printer needs to be calibrated. Press the button on the top of the FX400 to calibrate it.
9.Step 6 in the PTFoil application allows you the opportunity to print one test label to see if the Foil Label file is aligned properly. Unless you have already printed this label before, it is highly recommended you print a test print.
10.If the label needs adjustment, follow the instructions in Section 4 of this manual. Pressing the Set Offsets button will display a shorter version of the instructions in Section 4 of this manual.
11.Once you are sure the label is properly aligned, set the number of copies and press “Start the Job”. Both the LX Printer and FX400 will be sent the same number of prints. The software will regulate the speeds.
15
