2.Attach the stand pieces together using the included screws. Do not tighten the screws. The stand may need adjustment once the printers are in place. The LX printer stand (larger stand) should be on the left side.
3.Place the LX printer on the larger stand. There are two sets of indents in the top of the stand which correspond to the rubber feet of the LX printer. Place the LX400 on the smaller set of indents. Place the LX800/810 on the larger set of indents.
Front of Printer | Front of Printer |
LX400 Indents | LX800/810 Indents |
4.Connect power, install ink cartridges and label stock into your LX printer according to the printer’s manual.
5
