Chapter 5 System Status And Error Messages
118
TABLE NOTES:1. For
any
error with Reprint on Fault enabled: If the printer stops
while in the middle of printing a page, reloading the paper and
reprinting are required. There may be other cases requiring
reloading and reprinting; if so, a message appears.
2. For
any
error with Reprint on Fault disabled: If the printer stops
while in the middle of printing a page, reloading the paper is
required and pages are lost.
3. For error numbers 01, 14, and 15: If the error occurs while
paper is
not
moving, it is not necessary to reload or reprint.
4. For error number 02: If the error is caused by a paper-empty at
the lower sensor (Paper Near End Sensor), it is not necessary
to reprint.
5. Status message only. No operator action required to clear
message.
The Front Cover Open error can occur when either the Upper
Doors or the Paper Output Door (as seen on page 36) is open. If
the Upper Doors are closed, push the Paper Output Door in to
release it to its down position.