Chapter 4 General Cleaning
78
12. Loosen the precharger thumbscrews, and transfer/separator
charger thumbscrew, and pull the chargers out of the printer.
Legend:
1) Precharger
2) Transfer/Separator Charger
3) Thumbscrews
13. Place the chargers on a flat, clean work surface.
14. Using the brush cleaner and the wire cleaner (listed in Table 1
on page 63), remove the dust and dirt on the wires. When dirt is
caked on, the wires feel gritty. When clean, the wires feel
smooth.
15. Install the chargers. Fasten the charger screws to secure them.