Chapter 2 Loading Paper
26
6. Move the right tractor to the left or right until its pins line up with
the holes in the right edge of the paper, then close the right
tractor gate.
NOTE: When you place the paper on the tractors, you should
introduce a slight amount of side-to-side tension into the
paper. The right tractor must be set far enough to the right
so that there is no looseness or wrinkles in the paper. Be
careful not to set the right tractor too far to the right,
however, as too much tension may cause the paper holes
to tear away from the tractor pins.
7. Tighten the paper by moving the right tractor slightly outward
and lock the right tractor with the tractor lock.
8. If you are reloading paper following a “Paper Empty” message
with the printer power on, press ONLINE to place the printer
online. The printer automatically sets the physical top of form at
the leading edge of the paper and resumes printing.