Function Keys
33
PAGE EJECT Key
The PAGE EJECT key performs the following functions when the
printer is online:
When the JOB IN PROCESS status indicator lights

steadily,

pressing PAGE EJECT causes the printer to print all data in the
printer. The page is then cut at the perforation (unless the Burst On
Eject option is disabled).
When the JOB IN PROCESS status indicator

flashes,

pressing
PAGE EJECT causes the printer to print any data left in the buffer.
The paper motion caused by the page eject operation may interrupt
the printing of data that is not currently in the buffer. Once the paper
motion has occurred, the data that was not yet in the buffer should
print. The page is then cut at the perforation (unless the Burst On
Eject option is disabled).
To start downloading files to the printer, power off, then press the
PAGE EJECT + ONLINE key and hold them down while powering
on the printer. (See “Downloading Files Into Flash Memory” section
in Chapter 3 in the
User’s Manual.
)
IMPORTANT
Do not press PAGE EJECT while JOB IN PROCESS is flashing,
or your print job might become misaligned.
When the JOB IN PROCESS status indicator is not lit or flashing,
PAGE EJECT has no effect.
Pressing the SHIFT + PAGE EJECT keys together moves the
paper one paper length without printing or cutting the paper. It can
be used to feed the paper into (customer-supplied) postprocessing
equipment.
ENTER Key
When you enter parameters in the configuration menu, press
ENTER to select the value shown in the LCD. The printer confirms
your selection by placing an asterisk (*) next to the value in the
display. However, if the ENTER key is locked, “ENTER SWITCH
LOCKED” appears and the value is not accepted.