ProForm 2400 warranty Screws and Star Washers will be used in, step, not tighten the Screws yet

6. Remove the four 3/8" x 1" Screws (6) and 3/8"	6			6
Star Washers (14) from the Handrail Brackets
(89). Then, remove the Handrail Brackets from				14	89
the Left and Right Handrails (92, 93). The							6
Screws and Star Washers will be used in
step 8.			6				14	93
				89
			14		6
				14		92
7. Remove the four 3/8" x 1" Flat Head Screws	7				Hole
(15) and 3/8" Star Washers (14) from the Left				89				15
and Right Uprights (90, 99).
Orient the Handrail Brackets (89) so that the								14
indicated holes are in the positions shown.
Insert the Upright Wire (88) through the left		Hole
Handrail Bracket.	88
Attach the Handrail Brackets (89) to the			15
Uprights (90, 99) with the four 3/8" x 1" Flat
Head Screws (15) and 3/8" Star Washers (14)			14				99
that you just removed. Tighten the Screws.			89
		90
8. Identify the Left and Right Handrails (92, 93).	8						93
Hold the Left Handrail (92) near the Left Upright
(90). Insert the Upright Wire (88) into the large				89
hole in the bottom of the Left Handrail and out of
the front of the Left Handrail.				14
Slide the Left Handrail (92) onto the left Handrail		92		6
Bracket (89), and attach the Left Handrail with	88
two of the 3/8" x 1" Screws (6) and 3/8" Star								14
Washers (14) that you removed in step 6. Do
not tighten the Screws yet.	14						99	6
Attach the Right Handrail (93) as described
above. Note: There is not a wire in the Right	6	89	14
Upright (99).
	10	90	6