ProForm 2400 warranty Assembly

ASSEMBLY

• To hire a service technician to assemble this		•	To identify small parts, see page 6.
	product in your home, call 1-800-445-2480.	•	Assembly requires the following tools:
•	Assembly requires two persons.
			the included hex key
•	Place all parts in a cleared area and remove the
			one adjustable wrench
	packing materials. Do not dispose of the pack-
	ing materials until you finish assembly.		one Phillips screwdriver
• The underside of the walking belt is coated with			To avoid damaging parts, do not use power
	high-performance lubricant. After shipping, there
	may be some lubricant on top of the walking belt		tools for assembly.
	or on the shipping carton. This is normal. If there
	is lubricant on top of the walking belt, wipe it
	off with a soft cloth and a mild, non-abrasive
	cleaner.
1. Make sure that the power cord is unplugged.		1
	Attach the Left Wheel Cap (103) to the Base
	(105) with two #8 x 3/4" Screws (2).

Attach the Right Wheel Cap (not shown) to the right side of the Base (105) in the same way.

105 2

103

7