12.With the help of a second person, hold the con- sole assembly near the Uprights (90, 99). Connect the Upright Wire (88) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER.
Next, connect the two pulse wires. Then, re- move the wire tie from the Upright Wire (88).
13.Insert the pulse wires and the Upright Wire (not shown) into the Handrails (92, 93) as you set the console assembly on the Handrails.
Attach the console assembly with four 5/16" x 5/8" Screws (4) and 5/16" Star Washers (12).
Start all four Screws, and then tighten them. Tighten the four 3/8" x 1" Screws (6).
12 |
|
|
|
| Console |
|
|
|
|
| |
|
|
|
|
| Assembly |
| Pulse Wires | 88 |
| Console | |
|
| Pulse Bar | 90 | Wire | |
| 99 | Assembly |
| ||
|
| Wire | Console | ||
|
|
| Tie | ||
|
|
|
| Wire |
|
|
|
|
| 88 |
|
13 |
|
|
|
|
|
93 |
|
|
|
| 92 |
|
|
|
|
| |
12 |
| 6 | Console | 12 | 6 |
4 |
| Assembly | 4 | ||
12
