23
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, adjust the incline to the
lowestposition.If youdo notdo this,you maydamagethe
treadmillwhen youfoldit. Removethe keyand unplugthe
powercord. CAUTION: You mustbe able to safely lift 45
lbs.(20 kg) to raise, lower, or move the treadmill.
1. Hold the metal frame firmly in the location shown by the
arrow at the right. CAUTION: To decrease the possibil-
ity of injury, do not lift the frame by the plastic foot
rails. Make sure to bend your legs and keep your
back straight as you raise the frame. Raise the frame
about halfway to the vertical position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Using your left hand, pull the latch knob
to the left and hold it. Raise the frame until the latch pin is
aligned with the gap between the frame and the walking
platform, and then slowly release the latch knob. Make
sure that the latch pin is fully inserted into the gap.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of di-
rect sunlight. Do not leave the treadmill in the stor-
age position in temperatures above 85° F (30° C).
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert it to the storage position
as described above. Make sure that the latch pin is fully
inserted into the gap.
1. Hold a handrail and the frame and place one foot against
one of the wheels.
2. Tiltthe treadmill back until it rollsfreely on the wheels. Do
not pull back on the frame. Carefullymove the treadmill to
the desiredlocation. Never move the treadmill without
tipping it back.To reduce the risk of injury, use ex-
treme cautionwhile moving the treadmill. Do not at-
tempt to movethe treadmill over an uneven surface.
3. Place one foot against a wheel, and carefully lower the
treadmill until it is resting in the storage position.
Handrail
Frame
Wheel
Latch
Knob
Latch
Pin
Frame
Engaged
Frame