11
11. Attach the Left Handrail (21) to the console as-
sembly with three #8 x 3/4" Screws (1). Start all
three Screws before tightening any of them;
do not overtighten the Screws.
Remove the ties from the M8 Cage Nuts (39). If
necessary, press the Cage Nuts back into place.
21
39
11
Console
Assembly
1
1
12. Have a secondperson hold the console assem-
blynear the Right Upright (80).
Connectthe Wire Harness (92) to the console
wire.See the inset drawing. The connectors
shouldslide together easily and snap into
place.If they do not, turn one connector and try
again.IF THE CONNECTORS ARE NOT CON-
NECTEDPROPERLY, THE CONSOLE MAY
BE DAMAGEDWHEN THE POWER IS
TURNEDON.
Removethe wire tie from the Wire Harness (92).
Then,insert the connectors into the Right Upright
(80).
Setthe console assembly on the Right Upright
(80)and the Left Upright (not shown). Make sure
thatno wires are pinched.
80
Console Assembly
Console Wire
Wire Tie
92
12
92
Console
Wire