1.Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (57) so that the treadmill is more stable; do not fully fold the Frame yet.
Cut the shipping tie securing the Wire Harness (92) to the Base (99). Next, locate a tie in the in- dicated hole in the Base, and use the tie to pull the Wire Harness out of the hole.
2.See the inset drawing. Cut the plastic tie near the Wire Harness (92).
Attach two Base Feet (93) to the Base (99) in the locations shown with two #8 x 1" Tek Screws (2) and two Base Foot Spacers (94). Attach the other two Base Feet (93) with only two #8 x 1" Tek Screws (2).
1 | 92 | Hole |
|
|
| ||
57 | 99 |
|
|
|
|
| |
2 |
|
|
|
Plastic Tie 99 |
| 93 | 2 |
|
|
| |
94 | 93 2 |
|
|
|
| 93 2 | |
| 932 | Cut |
94 | 92 |
7
