![](/images/new-backgrounds/1147671/14767119x1.webp)
9.Have a second person hold the Right Handrail (105) near the Right Upright (79). Remove the tie from the bracket on the Right Handrail.
Insert the Upright Wire (86) into the bottom of the Right Handrail (105) and pull it out of the hole in the top of the Right Handrail.
Attach the Right Handrail (105) to the Right Upright (79) with three 5/16" x 3/4" Bolts (4) and three 5/16" Star Washers (9); do not fully tighten the Bolts yet. Be careful not to pinch the Upright Wire (86).
10.Have a second person hold the console assem- bly near the Right Upright (79). Connect the Upright Wire (86) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE
CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAM- AGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. Insert the connectors and the excess wire into the Right Handrail (105).
Set the console assembly on the Right Handrail (105) and the Left Handrail (not shown). Be careful not to pinch the wires.
9 |
|
|
|
| 86 |
| Hole |
| |||
|
|
| |||
| 4 |
| Tie |
|
|
| 4 | 9 |
| 105 | |
|
|
|
|
| |
|
|
|
| 79 |
|
10 | Console |
|
|
| |
| Assembly |
|
|
| |
| 105 |
| 86 | Console | Console |
|
| Wire | |||
|
|
|
| Wire Tie | Wire |
|
|
|
|
| |
| 79 |
|
|
| 86 |
|
|
|
|
|
10