6. Hold a Bolt Spacer (84) inside the lower end of | 6 |
|
|
|
|
|
the Left Upright (77). Insert a 3/8" x 4" Bolt (5) | 5 |
|
|
| 77 | |
with a 3/8" Star Washer (12) into the Left |
|
|
|
| ||
Upright and the Bolt Spacer. Repeat this step |
|
|
|
|
|
|
with a second Bolt Spacer (84), 3/8" x 4" Bolt |
| 12 |
|
|
|
|
(5), and 3/8" Star Washer (12). |
| 82 |
|
|
| |
Hold the Left Upright Spacer (82) and the Left |
| 84 |
|
|
| |
|
|
|
|
| ||
Upright (77) against the Base (60). Tighten the |
|
|
|
|
|
|
3/8" x 4" Bolts (5) until the heads of the Bolts |
|
|
|
|
|
|
touch the Left Upright; do not fully tighten the |
| 84 | 60 |
|
|
|
Bolts yet. |
|
|
|
| ||
With the help of a second person, tip the tread- |
|
|
|
|
|
|
mill so that the Base (60) is flat on the floor. |
|
|
|
|
|
|
7. Orient the Crossbar (78) so that the indicated | 7 |
| 7 |
|
|
|
bump is in the position shown. Attach the |
|
|
|
| ||
Crossbar to the Left Upright (77) and the Right |
|
|
|
|
|
|
Upright (79) with four 1/4" x 5/8" Bolts (7); do |
|
|
| 78 |
|
|
not fully tighten the Bolts yet. |
|
|
|
| 7 | |
|
|
|
|
|
| |
|
|
| 77 |
|
| Bump |
|
|
|
|
| 79 | |
8. Identify the Left Handrail (101). Remove the tie | 8 |
|
|
|
|
|
from the bracket on the Left Handrail. |
|
|
|
|
| |
Set the Left Handrail (101) on the Left Upright |
|
|
|
|
|
|
(77). Attach the Left Handrail with three 5/16" x |
|
|
|
| Tie | |
3/4" Bolts (4) and three 5/16" Star Washers (9); |
|
| 101 |
| ||
do not fully tighten the Bolts yet. |
|
|
| 9 | 4 | |
|
|
|
|
| 4 | |
|
|
|
|
|
| |
|
|
| 77 |
|
|
|
| 9 |
|
|
|
|
|
