1. Make sure that the power cord is unplugged. | 1 | 86 | 60 |
|
With the help of a second person, carefully tip |
| |||
the treadmill onto its left side. Partially fold the |
|
| 88 |
|
Frame (53) so that the treadmill is more stable; |
| Hole |
| 2 |
do not fully fold the Frame yet. |
|
| ||
Cut the shipping tie securing the Upright Wire |
|
|
|
|
(86) to the Base (60). Locate a tie in the indi- |
|
|
|
|
cated hole in the Base, and use the tie to pull |
|
|
|
|
the Upright Wire out of the hole. | 53 | 89 88 2 |
|
|
Attach two Base Feet (88) to the Base (60) in the |
|
| ||
locations shown with two #8 x 1" Tek Screws (2) |
|
|
|
|
and two Base Foot Spacers (89). Then, attach |
|
| 88 |
|
two Base Feet (88) with two #8 x 1" Tek Screws |
|
| 2 | |
(2). |
|
|
|
|
|
|
| 8988 | 2 |
|
|
|
|
| |
2. Attach a Wheel (90) to the Base (60) with a 3/8" | 2 |
|
|
|
|
x 2" Bolt (3) and a 3/8" Locknut (11). Do not |
|
|
|
| |
overtighten the Locknut; the Wheel must |
| 60 |
| 85 | |
turn freely. |
|
| |||
Press a Base Cap (85) into the Base (60). |
| 3 |
|
|
|
See the inset drawing. Cut the plastic tie near |
|
|
|
| |
the Upright Wire (86). |
|
|
|
|
|
|
| 11 | 90 |
| Cut |
|
|
|
| 86 | |
|
|
|
|
| |
3. Identify the Right Upright (79) and the Right | 3 |
|
|
|
|
Upright Spacer (83), which are marked with |
|
|
|
| |
“Right” stickers. Insert the Upright Wire (86) |
|
|
|
| 79 |
through the Right Upright Spacer as shown. |
|
|
|
| |
Then, set the Right Upright Spacer on the Base | 86 | Wire Tie |
|
| |
(60). |
| 8683 | |||
Have a second person hold the Right Upright |
|
|
|
| |
(79) near the Base (60). See the inset drawing. |
|
|
|
|
|
Tie the wire tie in the Right Upright securely |
|
|
|
|
|
around the end of the Upright Wire (86). Then, |
|
|
|
|
|
pull the other end of the wire tie until the Upright |
|
|
|
|
|
Wire is routed completely through the Right |
| 79 |
|
| 60 |
Upright. |
|
|
| ||
| 86 | Wire |
|
|
|
|
| Tie |
|
|
|
7
