19.Insert the Lat Tower (9) into the Front Leg (19). The Lat Tower must be turned as shown. Secure the Lat Tower with the Adjustment Knob (36).
20.Attach the Curl Pad (44) to the Curl Post (42) with two M6 x 16mm Screws (3).
21.Press three 48mm Round Inner Caps (12) into the three welded tubes on the Weight Stand Upright (62). Press a 2” Square Inner Cap (17) into the top of the Weight Stand Upright.
Press a 2” Square Inner Cap (17) into each end of the Weight Stand Base (49).
Attach the Weight Stand Upright (62) to the Weight Stand Base (49) with two M10 x 68mm Bolts (33) and two M10 Nylon Locknuts (1). Note: The Weight
Stand Base (49) must be turned so the two indi- cated holes are closer to the top of the Weight Stand Base (49) than the bottom.
19 |
|
|
| 9 |
|
|
| 36 |
| 19 |
|
20 |
|
|
| 44 |
|
|
| 3 |
| 42 |
|
21 |
| 17 |
|
| |
| 12 |
|
|
| 62 |
| 12 |
|
| 1 | 12 |
|
| |
17 | 17 | 33 |
| ||
|
| |
|
| Holes Upward |
| 49 | 17 |
|
| |
|
| 17 |
12
