ASSEMBLY
Make Things Easier for Yourself
Everything in this manual is designed to ensure that the weight bench can be assembled suc- cessfullyby anyone. However, it is importantto realize that the versatile weight bench has many parts and that the assembly processwill take time. Most people find that by setting aside plen- fy of time, assembly will go smoothly.
Before beginning assembly, carefully read the following information and instructions:
•Assembly requires two persons.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
•Tighten all parts as you assemble them, unless instructedto do otherwise.
1.
Before beginning assembly, make sure that you understand the information in the box
above. For helD identifvina small Darts. use the PART IDENTIFICATION CHART.
Attach a Base Foot (32) to a Stabilizer (6) with an M4 x 16mm Screw (52).
Attach a Support (7) to the Stabilizer (6) with two M10 x 93mm Button Bolts (45), an M10 Washer (53), an M1O Nylon Locknut (56), and an M10 Nylon Jamnut (69).
Attach an Upright Foot (33) to a Stabilizer (6) with two M10 x 68mm Button Bolts (64), four MIO Washers (53), and two M10 Nylon Locknuts (56).
Make sure that the Bolts are inserted from the
right side. Do not tighten the Locknuts yet.
Repeat this step with the other Stabilizer (6) and Support (7). Make sure that the M10 x 68mm Button Bolts (64) are inserted from the left side.
•As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.
•For help identifying small parts, use the PART
TI I | T. |
The following tools (not included) are required for assembly:
•Two adjustable wrenches
•One rubber mallet
•One standard screwdriver
•One Phillips screwdriver
•Lubricant, such as grease or petroleum jelly, and soapy water.
Assembly will be more convenient if you have a socketset, a set of
7
[ 45
32
64 53 6
i 69
52
53
33
5
