ProForm 831.21641.0 user manual Assembly, M10 x 74mm Button Screw

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included tools and your own adjustable wrench and Phillips screw-

driver .

Use the part drawings below to identify the small parts used in assembly. The number in parentheses below each drawing refers to the key number of the part, from the PART LIST on page 18. The second number refers to the quantity needed for assembly. Note: Some small parts may have been pre-attached for shipping. If a part is not in the parts bag, check to see if it has been pre-attached. If a part is missing, call toll-free1-888-533-1333.

M8 Nylon	M8 Split	M10 Split	M4 x 16mm	M4 x 22mm
Locknut (37)–4	Washer (36)–4	Washer (34)–3	Screw (41)–4	Screw (15)–2
M10 x 20mm Button		M10 x 74mm Button Screw (33)–4
Screw (35)–3

1.Identify the Front Stabilizer (2), which is narrower than the Rear Stabilizer (not shown). While another person lifts the front of the Frame (1), attach the Front Stabilizer to the Frame with two M10 x 74mm Button Screws (33).

1

1

2

33

4