FIG. 1
English
FEATURES (Fig. 2–4)
The motor arm assembly comes assembled. Open the box and lift the assembly out, as shown in Figure 1.
A On/Off switch | I. Cutting cart water |
B. Motor arm assembly | attachment |
C. Plunge handle | J. Edge guide |
D. Head lock knob | K. Water pan |
E. Cutting wheel cover | L. Saw frame assembly |
F. Cutting wheel | M. Water nozzles |
G. Rear water attachment | N. Water pump |
H. Cutting cart assembly | PP. Cutting Cart Extension |
FIG. 2
L
K
CD
B | E |
| |
| F |
| G |
A |
|
M |
|
O 
I
H
ASSEMBLY (Fig. 2–4)
1.Place saw frame assembly (L) on a stable surface.
2.Using the supplied wrench remove the screws (O) from the saw frame assembly.
3.Place motor arm (B) on frame assembly.
4.Secure the saw head by installing two of the screws
(O) into the holes closest to the rail. Tighten the screws with the wrench provided. Install the other two screws in the other two holes and tighten.
5.Place the saw assembly into the water pan (K) as shown in Figure 2.
6.Tilt the front of the cutting cart assembly (H) down on a slight angle. Align the arrow on the rear of the cutting cart with the round rail on the frame of the saw. Slide the cutting cart assembly onto the rail system clearing the cart stop with both pairs of rollers.
7.Place the threaded fitting onto the water pump (N). Attach the clear water tube (P) to the threaded fitting (Fig. 4). Place the water pump in the deep corner of the water pan, near the drain plug. Insert the pump power cord into the socket (Q).
8.Install rear water attachment (G).
9.Install cutting cart water attachment (I).
TO ATTACH CUTTING WHEEL (FIG. 5)
1. Using the smaller Allen wrench supplied, loosen (do |
not remove) the screw (R) on the side of the cutting |
wheel cover (E). Pull the rubber side flap back and lift |
the cover toward the rear of the saw. |
FIG. 3
Q
P
J
FIG. 4
U
A
P
O
FIG. 5
M
L 
PP
N
E
F
2. | Press spindle lock button. Remove the cutting wheel |
| nut (S) with hex wrench provided. Remove outer |
| flange (T). |
3. | Install the cutting wheel (F) with the rotational arrow |
| facing the same way as on the rotational arrow on the |
R
T
S
6
