HOW TO USE THE MANUAL MODE
Note: If there is a sheet of clear plastic on the face of the console, remove the plastic.
1.Press the Display button or the decrease but- ton on the console, or begin pedaling to turn on the console.
When you turn on the console, the display will light. A tone will then sound and the console will be ready for use.
2.Select the manual mode.
When you turn on the console, the manual mode will be selected. If you have selected a workout, reselect the manual mode by pressing the Workouts button repeatedly until the words MANU- AL MODE appear in the display.
3.Begin pedaling and change the resistance of the pedals as desired.
As you pedal, change the resistance of the pedals by pressing the increase and decrease buttons. Note: After you press the buttons, it will take a moment for the pedals to reach the selected resis- tance level.
4.Follow your progress with the display.
The upper left
The lower left
The upper middle
the resistance level of the ped- als for a few seconds each time the resistance level changes.
This display will also show your
heart rate when you use the handgrip pulse sensor (see step 5 on page 16).
The lower middle
tions. As you exercise, indica-
Track
tors will appear in succession around the track until the entire
track appears. The track will then disappear and the indicators will again begin to appear in succes- sion.
The upper right
The lower right
To view selected information at a larger size, press the Display button repeatedly until the desired information appears in the lower left and lower right displays.
15